Crystallizing dryer is widely used in plastics, chemical industry, medicine and other industries. It is characterized by rapid crystallization drying rate, low energy consumption, keeping material ...

Many engineering plastics in the process of processing, in addition to the need for dehumidification and drying, it is also required to crystallize, the ordinary dehumidification dryer can only deh...

The crystallization dryer is mainly composed of the storage container, the screw conveyor, the recrystallization hopper, the dust collector and the drying unit. It canbe used to dry the material qu...

First, injection temperature is not the same, PET injection temperature is much higher than PC, PC is amorphous material, PET is a crystalline material, you have to refer to the processing technolo...

Granulation production line: chemical raw materials from mixing, plasticizing, granulating, air-drying, cooling, storage, integrated automatic granulation machinery.The main equipment is composed o...

The granulation production line of some enterprises does not pay attention to the maintenance and operation of the workers' training before operation, which leads to the emergence of some large and...

There are many different design of granulator, but all the granulator can be divided into two major categories: cold cutting system and surface hot cutting system. The main difference between the t...

There are many different design of granulator, but all the granulator can be divided into two major categories: cold cutting system and surface hot cutting system. The main difference between the t...

Waste plastic is a very serious environmental pollution resource, it is not easy to degrade, and incineration will also cause harm to the atmosphere and our health. Therefore, the best environmenta...

The screw is designed with special mixing function and high speed capability to ensure that the plastic melts and the color is even and the extrusion volume is increased. The hanger die is designed...

The use of the belt production line has brought a lot of help to people, but some of the manufacturers and friends of the packaging production line, in order to run the packing line quickly, will n...

Small sheet production line can be used for plastic materials such as PE, PET, PVC or starch based degradable material for heating, extrusion, plastic molding process. The formed sheet is used for ...

Some enterprises' granulating production line does not pay attention to the maintenance and operation of workers' pre job training, resulting in some large and small problems during the operation o...

In march, there was a huge concentration of domestic events.Since the Chinese people's political consultative conference on March 3, the first session of the 13th and the 13th at a meeting of the N...

On March 26, 9 a.m., with a clear and crisp gong, futures varieties - China's first international crude oil futures listed formally in the center of the Shanghai international energy trade, marks t...

On October 27, ABS commodity index was 78.06, the same as yesterday, down 22.90% from the highest point 101.25 (2017-02-15) in the cycle, and up 47.81% from the lowest point 52.81 on December 28, 2...

On November 05, the quoted price of PP of zhenhai refining and chemical branch of China petroleum and chemical corporation was 8650 yuan/ton.Specification of PP: brand :T30S;Application level: wire...

On November 15, the PET commodity index was 49.06, up 0.75 points from yesterday, down 52.72% from the highest point 103.76 points (2011-09-22) in the cycle, and up 2.76% from the lowest point 47.7...

The PVC commodity index on December 12 was 89.37, unchanged from the previous day, down 10.63% from 100.00 points (2011-09-05),the highest point in the cycle, and up 53.37% from 58.27 points, the l...

第一，标识打印机：PET片材生产线都配有在线标识打印机，一般为喷码打印机。第二，牵引机：在PET片材生产线中，带状牵引装置用于薄壁及小直径管材，履带牵引装置用于厚壁和中大直径管材。有资料介绍，新的高速管材生产线配置了多组带状牵引装置，以适应高速度生产的需要。第三，切割机：径向锯在PET片材生产线中使用较多，尤其是中小口径管材生产线，而且一般都配有强力吸屑装置。第四，卷绕机：PET片材生产线生...